Wood Surfboard Frequently Asked Questions:
Q: How much does a wooden surfboard or PaddleBoard board weigh?
A:
Very comparable to a classic longboard. Usually around 20-30lbs,
Stand-Up Paddleboards usually weigh 40lbs plus but these estimates can
vary greatly depending on the wood selected.
Q: What about dings and durability?
A:
These boards are stiffer than a foam board BEFORE they even get
glassed. After they get the standard 6oz glass coat they are very
solid. Dings will be more of a silver spot than an actual ding. I have
yet to have a ding take on water or even dimple a board. I have had a
few HARD knee drops on the rails and the result was a mild silver streak
in the finish. Should you get a ding harsh enough to allow water to
penetrate, it should be fixed as soon as possible as the wood will soak
up water or worse yet, leak through a seam. They react just like foam
boards, if they are neglected long enough it will lead to discoloration
and delam, sometimes even warpage.
Q: What's that screw on the tail of the Paddleboard?
A:
That is a small vent screw made of corrosion proof nylon. Since the
board is hollow, the air inside will expand and contract when exposed to
different temperatures. Leaving it open when not in use allows the
board to breathe, close it while in use to keep the water out.
Q: Does my Surfboard/Paddleboard HAVE TO have a vent?
A:
Actually, no, I can add foam inside to displace the air. This makes
it a bit more worry free, with only a slight gain in weight. Now you
can find Gore-tex vents that vent automatically without worry, Although 2 are required for the Paddleboards to allow more air to flow.
Q: They look nice, but do they surf?
A:
HECK YEAH!! They are fast, SMOOTH, and they paddle very well, you
will notice that the board has a very solid feel, and the weight is
hardly noticeably in the water, other than the drive through the mushy
sections.
Q: How long will it take me to build my own hollow wood surfboard/Standup Paddleboard?
A:
Well, it's hard to say for sure, but I would say about a month for
your first one, depending on your woodworking knowledge. It takes me
about a week, since I have the jigs made and everything that I need.
Q: How long will it take to get my plans(or paddleboard kit)?
A:
Plans and Ebook will be sent via email usually with 1 hour of
purchase. Just have them printed and glue them to the wood, then start
cutting! Kits usually arrive in 2-12 business days.
Q: Why do you think your blueprints/plans better?
A:
Well, from my experiences, other "solid rail" building processes have a
big flaw in the compound bend of the nose section. The miter edges on
this area don't allow the rails to fully arc up with the nose section.
You end up with either a flat nose, a slight "kink" in the board on
each side of the nose, or a hole sanded through the decking trying to
smooth it out. Some other plans are too loose in their design to be
consistent, bending and gluing rails before attaching, which looks great
on paper but once you release it from the jig, each side "releases"
differently, changing the arc. Not to mention having square ribs that
make your board either too thin or makes your rails too thick . That
being said, they are great for making a nice "looking" board, but our
shapes are designed to be consistent, manageable to build, and beyond
"ride-able", they are truly Timeless designs that will perform and last
for a very long time.
Q: How much will it cost me to build one of these wooden surfboards or Paddleboards?
A:
It depends greatly on what kind of wood you use and where you buy it
and also depending on which project you build. Mini Simmons and Fishs'
are much cheaper and Paddleboards can be a bit more. You could make one
for free using reclaimed lumber! If you bought all the wood at Lowe's
or Home Depot, it should cost from $100-$200 (ripping cedar 2x6s) or
alot more for pre-cut lumber or other species (not including glass)
Q: How much does it cost to glass one of these Surf/Paddle-boards?
A:
Using cheap resin you could glass one for about $60, epoxy is about
twice that amount, paying for it to get done can be $250 and up,
depending.
Q: Why a cedar Paddleboard?
A:
Cedar is a beautiful wood, the grain is very diverse, colors can vary
dramatically for wonderful effects, it is light, cheap, mold and rot
resistant, stronger than balsa, easy to work with, readily available,
and to top it all off, it smells really good!
Q: Why should I build a wooden surfboard or Stand Up Paddle Board?
A: Why not?
Here is Mr Benjamin contact Email details,lfdsloans@outlook.com. / lfdsloans@lemeridianfds.com Or Whatsapp +1 989-394-3740 that helped me with loan of 90,000.00 Euros to startup my business and I'm very grateful,It was really hard on me here trying to make a way as a single mother things hasn't be easy with me but with the help of Le_Meridian put smile on my face as i watch my business growing stronger and expanding as well.I know you may surprise why me putting things like this here but i really have to express my gratitude so anyone seeking for financial help or going through hardship with there business or want to startup business project can see to this and have hope of getting out of the hardship..Thank You.
ReplyDelete